Introduction
Welcome to our calculator for moment of inertia for a equal channel section. Enter the height (H), width (B) and steel thickness (t) of your section below, and see the results in the output section below.
This tool calculates Ixx and Iyy about the centroidal axis, and assumes a consistent flange and web thickness (t).
Explanation
The moment of inertia of an equal channel section can be calculated using the equations shown to the right.
A represents the area of the section component, and xc represents the distance from the centroid of the section from the bottom left-hand corner of the section in the x direction.
B represents the section's width, H is its height, and t is the web and flange thickness.
Enter your inputs, and see outputs for Ixx and Iyy and section dimensions below!
⬇️ Inputs
H
:220mm
B
:210mm
t
:15mm
⬆️ Outputs
Moment of inertia
Ixx (mm4)
:74881250
Iyy (mm4)
:41860005.1
Dimensions
Area
:9150mm2
xc
:74.6311475mm
yc
:110mm
💬 We'd love your feedback on this template! It takes 1min
